JIS C3410 Armored Shipboard Control Cable

JIS C3410 Armored Shipboard Control Cable Application

The cable is fixed installation, used for Control, signal system in ship.

JIS C3410 Armored Shipboard Control Cable model

250V MPYC, FA-MPYC
250V MPYCY, FA-MPYCY

JIS C3410 Armored Shipboard Control Cable Standards

– Design guide : JIS C 3410(1999/2010)
– Flame retardant : IEC 60332-1 & IEC 60332-3 Category A (FA-Type)
– Cold bend/impact : CSA 22.2 No. 03 (-35 ) (Cold Type)
– Max. conductor temperature :85

JIS C3410 Armored Shipboard Control Cable Construction

recommendations
Minimum cable bending radius
The internal radius of cable bends which are not subjected to movements by expansion, is not to be less than :
6 times the external diameter of cable
Cable which are subjected to movements by expansion and the high voltage cable are to be bent to a form of at least 12 times cable diameter.
Installations temperature
Minimum recommended temperature of installations :
-10°C Ship wiring cable with PVC sheath
-20°C Elastomeric on/off shore cables
Installations pulling force
The cable pulling force can be estimated, as a maximum limit :5Kp per mm2 conductor area in the cable.Additional tension will be supplied from the braid and the insulation and sheathing compound.

Specifications:

Cores: 1, 2, 3, 4, 5, 7, 10, 12, 14, 16,19, 24, 27, 30, 33, 37.

Nominal Cross-section Areas: 1mm2

Certificates:

CCS,LR,ABS,DNV,BV,GL,NK,RINA; 85℃