Maintenance of anchor chain

1. The tightness of the anchor chain chain should be appropriate, too tight will increase power consumption, and the bearing will be easy to wear;

2. If the anchor chain is too long or stretched after use, it is difficult to adjust. The chain links can be removed depending on the situation, but it must be an even number. The links should pass through the back of the chain with the cleats inserted outside, and the openings of the cleats should be in the opposite direction of rotation.

3. After the chain of the anchor chain is seriously worn, the new sprocket and new chain should be replaced at the same time to ensure good meshing. You can't just replace a new chain or a new sprocket alone.

4. The old chain of the anchor chain cannot be mixed with some new chains, otherwise it will easily cause shock during transmission and break the chain.

The above are several aspects of the maintenance and attention of the anchor chain chain, I hope the majority of users can pay attention to it.