Hydraulic Folding Crane Foldable Knuckle Boom Cranes are reliable and effective cranes for general cargo handling and service onboard ships and offshore units.
Heavy Duty Crane Lifing Hooks Heavy duty crane lifting hook is connected with pulleys to hang on the wire rope of lifting machinery. It can be classified into single hook and double hooks according to the appearance, or foeged hooks and strapped hooks according to produced method. It is the most widely used tool when lifting cargos.
Crane Double Hook Blocks During the operation, hook is hit frequently, so all of them are manufactured from high quality carbon steel. It is one of the most common lifting tools in hoisting machinery. Single hook block is often used in the situation that the lifting weight is under 80 tons. While the crane double hook is suitable for the object with greater weight.
Marine crane Offshore crane is designed especially for oil platform, platform supply vessel, barge etc. Based on the design consideration of API-2C, offshore cranes can be in the working condition of inboard lift, outboard lift and personnel lift.
Crane: 5T-18M Knuckle Boom Crane Main Technical Specifications 1、Working Load: 50kN 2、 Hoisting Height: 25m 3、 Hoisting Speed: 10m/min 4、 Slewing Speed: 0.5r/min 5、 Slewing Angle: 360° 6、 Working Radius: 1.8-8m 7、Time of Arm Change: 120s 8、Electric Motor
General Cargo Crane: 1. Taking landing working condition as design basis, marine crane is specially designed for various cargo ships. 2. The crane can be installed in the middle of ships or bow sides.
Hose Crane 1. Luffing time would be an average value when the cylinder stretch out and draw back. 2. Motor current should be calculated based on the three-phase AC 380V, 50Hz.
Crane Used Steel Wire Rope We are mainly focus on producing wire rope with large diameter, super length, high tension and special construction. Diameter ranges from 0.18mm to 260mm in a variety of ropes of point contact, line contact and surface contact. The tensile strength can reach Grade 2160 or EEIPS. There are all kinds of wire drawings, twisting equipmets and morden assembly line can enable pre-tension, heat treatment hot-dip galvanizing for ropes in different diameters. We can produce various of steel wire rope according to our national standards such as GB8919, GB/T20118, GB/T20067 and also international standards ISO, ASTM, EN, JIS and API etc. Got API, DNV, LR, BV, CCS, MA and KA certification,which assure good quality control.
3 Sheave Crane Block Material: Alloy Steel WLL: 16Ton to 100Ton Fiited with cylindrical roller bearing, reeving guide and becket Painted in yellow with black stripes Sheave can be adjusted to other wire rope diamter.