POOL TW Anchor (POOL Anchor, TW Type) China POOL TW Anchor(POOL Anchor, TW Type): POOL TW Anchor (POOL Anchor, TW Anchor) POOL TW Anchor(POOL Anchor, TW Type) is also an High Holding Power Anchor, holding-power-to-weight is about 6, anchor flukes are smooth and sharp, suitable for all soil conditions, drop and weigh anchor is convenient, commonly used as Bow Anchor or Offdrill Anchor.
U.S.N. Stockless Anchor We have been a marine anchor supplier since 1996, including Stockless Anchor, Stock Anchor, High Holding Power Anchor and Offshore Anchor. ABS, LR, BV, LR, DNV, GL, KR, IRS, CCS Certificate is avialable for our products. With the advantage of wide source, good quality and excellent service, we could be your reliable partner in China.
US Navy Stockless Anchor The U.S.N stockless anchor is the most commonly used conventional stockless anchor. It is mainly used for technical ships, rescue ships, used as positioning anchor.
95 SPEK Anchor Spek anchor is one type of stockless anchors. Spek anchor is modified from the Hall anchor, whose core of anchor head is located in the center of the pin center line to the bottom. The structure of Spek anchor is characterized that there is anchor crown plate and reinforcing ribs at the anchor crown. Therefore, the anchor claw is easily to turn to the ground and has better stability. Moreover, when collecting the anchor, its flukes keep naturally upward and overturn immediately when touching the hull plate to avoid damaging the shell plating.
Type SR SPEK Ancor
China Type M SPEK Anchor: Type M Spek Anchor M Type SPEK Anchor is the improved anchor with lower point of gravity based on hall anchor, Anchor fluke grounded easily, more stability, when SPEK Anchor haul up, anchor fluke will turn over against the hull, which would not make damage to ship hull.
Baldt Stockless Anchor Baldt Anchor Baldt anchor is a common stockless anchor, it is usually used as a bower anchor.
Hall Type Stockless Anchor Hall Type Stockless anchor is widely used in the various marine vessel, manufactured as GB/T 546-1997, our design drawings and productions of anchors have been approved from LR, ABS,BV, DNV, KR, NK, GL, IRS and CCS classification society. Each anchor can be supplied with classification certificate.
D Hone Anchor This is the D’HONE anchor, a stockless High Holding Power anchor. High Holding Power means you can reduce 25% of the weight that would normally be required for conventional anchors. It is a very strong anchor and especially suitable for pockets.
