CZF Marine Exhaust Blower Axial Fan CZF series marine axial flow fans (the fan) are new-type and energy save, and low-noise fans. They are suitable for chamber ventilation and also applicable for other suitable places.
HTF Axial Flow Smoke Exhaust Fan HTF fire axial flow fan is usually equipped with double speed motor, in normal time, the motor runs at low speed for ventilation, once fire happens, the motor will be changed for high speed operating automatically through electric control system and remove the smoke rapidly within half an hour.
CLZ Marine High pressure Axial Flow Fan CLZ marine axial fan is designed primarily for ventilation of cabins, air supply or air exhaust. The delivered air can contain the salt fog or acid vapor from the battery. The temperature of the air can not exceed 50 centigrade degree.
DFBZ Wall Mount Square Axial Flow Fan DFBZ series fan is equipped with special fan motor of low noise and it is direct drive. The complete fan is made into square structure, good-looking appearance and reserve square hole on the wall and easy to install. The gravity type shutter is installed on the air outlet, in order to prevent back flow of outdoor rain and natural wind.
SF Marine Low-noise Axial Flow Fan The axial-flow fans of SF series is blessed with smooth streamline surface, stable operation, high effiency, low noise and less energy consumption and so on, and classed into the following four models according to use requirements:manifold pipeline type, stationary type, wall type and position type, as 12 models is accoring to impeller diameter.
CSZ Marine Water Driven Axial Flow Fan CSZ series fan have high anti-hazard classification, sound anti-wobble, anti-vibration and anti-impact performance. The fan simple structure. Low weight, simplicity of operation as well as its port-ability ( normally only one operator required ) ,driven direct by fire protection water, this ventilator depends on no other power with sealed bearings. It largely reduced the maintenance job. With a wide applicability, this type of ventilator can work at ideal for ducting flammable and explosive gases or steam as well as poisonous or other harmful gases.
CBF Marine Explosion proof Draught Fan Can be used in hazardous areas:Zone 1 and Zone 2 Can be used in explosive gas atmospheres of Category ⅡA,ⅡB and ⅡC where the temperature classification is T1-T4
JCL CLQ Marine Centrifugal Fan Introduction :JCL(CLQ) series marine centrifugal fan is capable of blowing air, such as ocean air containing salt vapor and corrosive air containing oil vapor and a small quantity of acid steam which generated by the natural evaporation of the batteries. So it can be widely used for ventilation of various cabin rooms and the boiler, they are also applicable in other places that suit.
DF Low noise Centrifugal Fan Widely used in telecommunications,electricity,electrical,electronics,geology,mining,shiping,paper and other industries and sectors,Especially for plastic machinery,printing machinery,blueprint paper,dryer,blow molding machines and underground facilities and other places of cooling,temperature control and ventilation.
