China Offshore Danforth Anchor: Danforth High Holding Power(HHP) Anchor is from 60KGS to 25000KGS, the flukes are wide and long, dig deeply into the seabed, good stability and big holding-power-to-weight ratio, the Fluke/Shank angle is about 30 degrees.
JIS F 7356 Bronze 5K Lift Check Valves: Design Standard: JIS F7356-1996 Test Standard: JIS 7400-1996 Hydraulic Test Pressure: Body- 1.05Mpa, Seat-0.77Mpa~0.4Mpa Flange size as per JIS B2220 - 5K
JIS F 7354 Cast Iron 5K Screw- Down Check Angle Valves: Marine Cast Steel Screw Down Check Angle Valve also can be called as Marine Cast Steel Angle SDNR Valve or SDNR Angle Valve. It is suitable for the pipe system with the medium fresh water, air & other gas, oil and steam with the temperature not over 300 centigrade degree.
Hydraulic Folding Crane Foldable Knuckle Boom Cranes are reliable and effective cranes for general cargo handling and service onboard ships and offshore units.
Rectangular base eye plate are essentail for rigging systems.
Pawl Type Anchor Chain Stopper Chain stopper can fix the anchor chain and prevent it slip out.
GB290-84 Hawse Pipe Chain Wheel Marine chain wheel, installed between hawse pipe and chain stopper, is a kind of marine chain roller which is used to avoid the friction between anchor chain and hawse pipe. CB290-84 chain wheel for hawse pipe is mainly made of casting steel and carbon fiber steel. Its surface is clean and smooth. There is no any defects such as airhole, crack which may affect chain wheel’s strength. The roller is flexible to turn. It is anti-rust as well. Our marine chain wheels are approved by quality inspection center. If you’re interested in our products, please feel free to contact us.
CB 3062-2011 Four Roller Fairlead Type B Fairlead with horizontal rollers, consisting of vertical and horizontal rollers, can guide mooring ropes from any direction.
CB 58-83 Guide Roller CB*58-83 fairlead roller is applicable to guiding mooring rope’s direction. Its roller diameter varies from 100mm to 450mm. The material of CB58-83 roller can be steel or iron. Steel wire, hemp wire and synthetic fiber wire are suitable for CB*58-83 standard fairlead roller. Among these three types of wire, the steel wire has the largest breaking load value.
