CNF Z Ship Steam Heating Fan Heater The CNF (Z) steam series heater consists of a heat sink coil, an impeller, a Wind circle, and a motor. Heat pipe, the heat dissipating fin adopts a mechanical winding method, which is wound around the heat pipe (can also be used as needed). The heat radiating fins and the heat pipe have a wide and tight contact surface, thereby improving heat transfer performance and working pressure, and the heating medium is generally 0.3MPa saturated steam, the highest saturated steam working pressure is 1.0 MPa, the impeller adopts LF3 anti-rust aluminum, the casing is welded by ordinary steel plate or stainless steel plate.
CNF R Marine Hot Water Heating Fan Heater The marine hot water heating heater is mainly used when the ship is parked and the ambient temperature is close to zero. In order to ensure the cabin temperature required for the corresponding cabin of the ship, in order to facilitate the timely and rapid start of the cabin equipment, the ship heater is a ship important essential equipment .
CNF D Marine Electric Heating Fan Heater The CNF (D) electric heating series heater consists of an electric heater, an impeller, a collecting ring, a motor, and an electric control box. The electric heating tube of the electric heater is wound around the stainless steel tube by mechanical winding. The impeller adopts LF3 anti-rust aluminum;
CNF Y Marine Hot Oil Fan Heater The CNF (Y) hot oil series heater consists of the heat sink coil, impeller, collecting ring, and motor. The heat-dissipating coil is made of stainless steel tube wrapped around stainless steel; the heating medium is generally 0.8~1.5MPa hot oil, the impeller is made of LF3 anti-rust aluminum, and the casing is welded by ordinary steel plate or stainless steel plate.
