Mining Chain Twin Outboard Padless Shackle Connectors We are into the business of providing a wide range of Outboard Chain Shackle Type Connectors. Twin Outboard Chain Shackle type Connectors (DIN 22253 / ISO 1082) with wear pads or padless, are designed to hold the scraper chains to scraper bars for mining chain conveyors & scrapers systems, generally for ash removal scraper conveyors. These Connectors are single piece drop forged from choicest of materials ensuring linear arrangement of chain links.
Twin Outboard Chain Connectors Product Description These drop forged connectors are designed to bolt rigidly to scraper bars, thereby enhancing their mechanical properties. It is important to ensure that bolt is correctly tightened, otherwise full benefits of this type of shackle are lost. Rigid assemblies improve location in the pan race and reduce build up. The connectors are based on specification ISO: 1082.
Block Connector POWERBLOCK RUD block type connectors POWERBLOCK run vertically over sprockets and are used in high performance mining applications.
Dominator Connector for Mining RUD flat connectors DOMINATOR can be used either vertically or horizontally in round link chain strands. Especially in plough chains acc. to DIN 22252 as well as horizontally as repair connectors in flat link chains acc. to DIN 22255 RUD connectors DOMINATOR are used.
Single Plane Chain Connectors TK TK Connectors: The mechanical properties are at least the equivalent of DIN 22258 Part 2.
TKF Connectors (TWN 0145) TKF - Connectors (TWN 0145) The TKF connector has been developed for both vertical and horizontal applications. The mechanical properties are at least the equivalent of DIN 22258 Part 1. Surface: galvanised
Flat Serrated Chain Link The flat serrated link for mining ring chain is suitable for underground coal mining scraper, transfer machine and coal plough.
DIN 22258 Flat and Kenter and Block Type Chain Connectors
Flat Type Connectors The Flat Type Connector was specially developed for vertical and horizontal applications. The mechanical properties are at least the equivalent of DIN 22258 Part 1.
