G80 chain Manufacturers

During the past few years, our business absorbed and digested state-of-the-art technologies the two at home and abroad. Meanwhile, our firm staffs a group of experts devoted to your development of G80 chain,Grade 80 chain,alloy chain, We've been devoted to offer professional purification technology and methods in your case!
G80 chain, We're in continuous service to our growing local and international clients. We aim to be worldwide leader in this industry and with this mind; it is our great pleasure to serve and bringing the highest satisfaction rates among the growing market.

Hot Products

  • Type H14 Wide Body Shackle

    Type H14 Wide Body Shackle

    China Type H14 Wide Body Shackle: Material : Body: High tensile steel Pin: Alloy steel.
  • G2150 Chain Shackle with Safety Bolt Pin

    G2150 Chain Shackle with Safety Bolt Pin

    G2150 Chain Shackle with Safety Bolt Pin Heat treated: drop forged, tempered and quenched Minimum ultimate strength / Safety factor: 6 times working load limit (WLL) Standard: EN13889 and US Fed. Spec. RR-C-271 Sizes: 1/4 to 3 inches, can be customized​
  • Permanent Wire Chaser

    Permanent Wire Chaser

    Permanent Wire Chain Chaser Permanent Wire Chaser provides a chasing system for drilling rigs equipped with wire rope mooring cables. The Rocker is made from an abrasion resistant alloy, which having a higher through-hardness.
  • Heavy Duty BSS464 Thimbles

    Heavy Duty BSS464 Thimbles

    HEAVY DUTY BSS464 THIMBLES Heavy duty BSS464 thimbles are used in lifting applications. These are available from 6mm to 56mm rope diameters.
  • Common Aluminum Anode for Seawater Cooling System

    Common Aluminum Anode for Seawater Cooling System

    Common Aluminum Anode for Seawater Cooling System The most commonly used aluminum alloy anodes are Al-Zn-In series and Al-Zn-Hg series, applicable to the cathodic protection of ships, ports and marine facilities in seawater, sea water cooling system and reservoir deposited water site and other construction.
  • Chain DIN 5684

    Chain DIN 5684

    Chain DIN 5684 Our chain DIN 5684 is a kind of welded fine tolerance hoist chain meeting the requirements of DIN 5684. The chain is grade T (types T, DAT, DT), which comply with the requirements of DIN EN 818-7. Excepting type DAT and type DT chains, other grade T chains are not only suitable for chain hoists, but also other lifting equipment.

Send Inquiry